Remote management controller (XSCF)
User ID
Enter the ID of an XSCF user account with administrative authority over the target chassis.
Enter a string of up to 31 alphanumeric characters, hyphens ("-"), and underscores ("_"). This name must start with an alphabet
character.
This user should have "platadm" privileges for XSCF.
Password
Enter the password of an XSCF user account with administrative authority over the target chassis.
Enter up to 32 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
"!", "@", "#", "$", "%", "^", "&", "*", "[", "]", "{", "}", "(", ")", "-", "+", "=", "~", ",", ">", "<", "/", "'", "?", ";", ":"
3. Click <OK>.
The mounted chassis will be displayed under the server resource tree.
Any partition mounted within this chassis will be detected automatically and shown as: [
chassis_name
-
partition_number
[Unregistered]].
The only operation available for those unregistered partitions is server registration, while the ROR console can only display their
hardware statuses and properties.
5.9.2 Registering SPARC Enterprise (M3000/T Series) Servers
This section explains the method for registering SPARC Enterprise (M3000/T series) servers.
Use the following procedure to register SPARC Enterprise (M3000/T series) servers:
1. In the ROR console server resource tree, right-click [Server Resources], and select [Register]-[SPARC Enterprise (M3000/T series)]
from the popup menu.
The [Register SPARC Enterprise] dialog is displayed.
2. To use this feature, the following settings must first be defined:
- Physical Server Name
- [Register agent] checkbox
- Remote management controller (ILOM/XSCF)
- Controller type
- IP address
- User ID
- Password
- SNMP Community
- Admin LAN
- IP address
With Agent Registration
- OS
- Type
- User ID
- Password
Physical Server Name
Enter a name to assign to this physical server.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
- 48 -