Filter
Top Products
- The maintenance mode of server virtualization software has not been set.
[VMware]
- For VM hosts for which standby mode has been set by server virtualization software, calculation results are displayed for free space
even when the status is "stop".
In Resource Details for the VM host, and when using the command (rcxadm pool list -name
Resource_pool_name
), the total CPU capacity
is displayed in the format of
CPU_performance
*
CPU_core_count
.
CPU performance
is displayed as a number truncated to one decimal
place. Therefore, depending on the value of the second decimal place of CPU performance, CPU capacity may not match the actual free
CPU capacity.
Max. Number of Possible L-Servers View
This section explains how to display the converted number of L-Servers that can be created with VM pools, server pools, and storage
pools.
1. Left-click the target VM pool in the orchestration tree, and select the [Resource List] tab.
2. In the [Template] selection list, select the L-Server template to convert.
3. Click <OK>.
The number of L-Servers that can be created is displayed in [Number of creatable L-Servers].
Note
- When the status of the VM host and virtual storage is one other than "normal", the resource will be excluded from L-Server allocation
regardless of its available space. (*1)
However, a value corresponding to the available space of the resource will be displayed for the L-Server converted number.
- When using physical L-Servers, the L-Server converted number of virtual storage is an estimate, and an error may occur during L-
Server creation.
- The available space on resources and the space displayed for [Number of creatable L-Servers] are calculated as follows: (*2)
- CPU, memory
Total_resource_capacity (*3) - (Total_of_resources_used_for_virtual_machines (*4)) -
Reservation_capacity_for_the_VM_host (the capacity reserved for the HA function enabled on the VM software)
(*5)
- Addresses and available space on the network
Total_resource_capacity - (Total_of_resources_used_for_L-Server (*6))
- Free storage space
Total_resource_capacity - (Total_of_resources_used_for_L-Server (*6) + Total_of_images (*7))
- Free disk space
Free space as a resource is not displayed.
The free space is calculated as the free space of a resource pool when the following conditions are met:
- Disks are not used for L-Servers or cloning images
Number of creatable L-Servers is displayed as follows:
- When the number of disks specified for an L-Server template is 1, and when the disk capacity specified for an L-Server
template is the same capacity as or smaller than the disk resource
1 is displayed.
- 247 -