Filter
Top Products
- Number
Clicking <Add> will display the [Disk Definitions] dialog, and then specify the number of disks to add. Specify a number 1 or
larger.
Resource type
Specify the disk to allocate to the L-Server.
Select from the following items.
- Automatic assignment
Select a suitable virtual storage resource from those registered in the appropriate storage pool. Create the specified size of disk
resources, and allocate them to the L-Server. Set [Automatic] for the default value.
Note
- When there are storage pools with and without Thin Provisioning attributes configured that have the same priority, the storage
pool that will be given priority is decided based on definition files. For details on definition files, refer to "C.1 Definition Files
Commonly Shared when Creating Virtual L-Servers" in the "Setup Guide CE".
- If dynamic LUN mirroring has been set in the virtual storage, a volume is also created on the ETERNUS storage in the remote
site specified in the definition file. If the ETERNUS storage in the remote site has been detected by Resource Orchestrator, it
will be detected as a disk resource that was prepared beforehand, but do not register it to the storage pool.
- Storage pool
Select a virtual storage resource registered in the specified storage pool. Create the specified size of disk resources, and allocate
them to the L-Server.
- Virtual storage
Displays virtual storage resources such as RAID groups or aggregates as a list.
Select from the displayed virtual storage resources.
Create the specified size of disk resources from the specified virtual storage resource, and allocate them to the L-Server.
When using the virtual storage resource on which the Thin Provisioning attributes are configured, the disk resource can be created
specifying a size exceeding the actual disk space.
- Disk
Assign the LUN created in advance to the L-Server.
When specifying search conditions, the relevant disk resource list is displayed.
Select from the displayed disk resources.
The specified disk resources are allocated to the L-Server.
Search conditions
Storage pool
Select the storage pool of the storage destination of the disk resource.
Search size
Enter the lowest value of the disk size to be searched as a number with up to one decimal place, in units of gigabytes.
Allocation status
Specify the status for the disk to allocate to the L-Server.
- Unallocated
Specify when selecting a disk resource which is not allocated to another L-Server.
- Allocated
Specify when selecting a disk resource which is allocated to another L-Server.
- 176 -