Filter
Top Products
- PRIMERGY TX300 S6
- PRIMERGY TX300 S5
- PRIMERGY TX300 S4
- PRIMEQUEST 1000
- Other PC servers
Set the basic information, and click <Next>.
b. Enter information on the CPU and memory.
CPU Perf
Select the CPU frequency. Enter a number between 0.1 and 10.
CPU Num
Enter the number of CPUs to be allocated to the L-Server.
Enter a number between 1 and 240.
Memory Size
Enter the memory capacity to be allocated to the L-Server.
Enter a number between 0.1 and 8192.
Set the basic information, and click <Next>.
c. Enter NIC information.
NICs
Enter the number to identify the NIC definition to allocate to the L-Server.
Index
Index is a number in which the NIC definition allocated in L-Server is identified.
Configure a number in the following range:
0 - 31
Click <Add NIC> to add a NIC.
Clicking <Delete> deletes a NIC.
NIC Num
Specify the number of network resources (NumOfNetworkLinks) to configure for NICs. Each index is specified.
Specify a number in the following range:
1 - 4098
NIC Group (Optional)
Specify a NIC redundancy group. Specify a NIC redundancy group, if necessary.
Up to 16 NIC groups can be added.
Index
Enter a NIC redundancy group index. Configure a number in the following range:
0 - 15
NIC Num
Enter the number of network resources (NumOfNetworkLinks) contained in the NIC redundancy group.
Specify a number in the following range:
1 - 4098
One network resource is set to NIC and the NIC redundancy group when omitting it.
- 152 -