Filter
Top Products
Clicking <Add> adds a disk.
Enter the disk number.
[VMware]
A number between 0 and 55 can be specified.
[Hyper-V] [Oracle VM]
A number between 0 and 59 can be specified.
[Xen]
A number between 0 and 251 can be specified.
[RHEL-KVM]
A number between 0 and 16 can be specified.
[Solaris Containers]
0 can be specified.
Enter the disk information and click <Next>.
f. Enter the information on server redundancy, alive monitoring, boot location, and ServerImageLink.
Redundancy
Select a server redundancy to be allocated to the L-Server.
Select "HA" when enabling redundancy.
Select "None" when not enabling redundancy.
[Xen] [RHEL-KVM]
Only "None" can be specified.
Alive monitoring
Configure alive monitoring as enabled or disabled.
This item can only be configured when "Redundancy" is enabled.
[Xen] [RHEL-KVM] [Oracle VM] [Solaris Containers]
The alive monitoring configuration is not displayed.
Boot Location
Decide whether the physical location of servers to be allocated to the L-Server can be changed.
This item can be configured when "VM" is selected for "Server Type" in the basic information.
Select "Fixed" when starting the L-Server on the same VM host that operated last time.
Select "AttachAtBoot" when automatically selecting the optimal VM host when the L-Server is started.
[Xen]
Only "Fixed" can be specified.
Repurpose
Specify whether to release the server allocated to the L-Server when the power is turned off.
Select "true" when releasing automatically.
Select "false" when not releasing automatically.
Nothing is set by default. In this case, the value set to the definition file is used when an L-Server is created.
[Xen]
Only "false" can be specified. It can be omitted.
ServerImageLink
Specify "all" when deploying all disks with the same configuration for images, including data disks.
Specification is possible for VMware and Hyper-V.
This specification is not required when deploying only system disks.
- 158 -