Filter
Top Products
1. Right-click the target L-Server in the orchestration tree, and select [Power]-[Reboot] from the popup menu.
The confirmation dialog is displayed.
2. Click <OK>.
The L-Server is restarted.
Use the following procedure to restart forcibly:
1. Right-click the target L-Server in the orchestration tree, and select [Power]-[Reboot (Forced)] from the popup menu.
The confirmation dialog is displayed.
2. Click <OK>.
The L-Server is restarted forcibly.
From the command-line, execute rcxadm lserver restart.
For details on the rcxadm lserver restart command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
Note
- If no OS is installed on the L-Server, the L-Server may not be restarted. In that case, perform a forced restart.
[Oracle VM]
- Depending on the presence or absence of the VirtualizationMethod attribute and the PV (Paravirtualized) driver of VM guests,
restarting operations may cause a forced restart, and a forced restarting operation may cause a restart.
17.1.4 Batch Power Operation of L-Servers in Resource Folders
This section explains the batch power operations of L-Servers in resource folders.
When performing batch power operation of L-Server in resource folders, configure the startup priority settings for L-Servers in advance.
For priority order settings, configure from [Startup priority] of the [Modify an L-Server] dialog, or [Server] tab of the [Create an L-Server]
dialog.
For details, refer to "16.2 Creation of Physical L-Servers Using Parameters" or "16.3 Creation of Virtual L-Servers Using Parameters".
Note
The batch operations for an L-Server in a tenant are only available for Basic mode.
Starting an L-Server in a Resource Folder
Use the following procedure to start an L-Server in a resource folder.
1. Right-click the target resource folder or tenant in the orchestration tree, and select [Power]-[ON] from the popup menu.
The [Power On L-Servers] dialog is displayed.
Point
A list of L-Servers that are targets of the power operation is displayed.
The display order is in descending order of priority.
Even if the list of L-Server is not displayed, the power supply can be operated.
2. Click <OK>.
L-Servers in a resource folder are started in the order of priority.
- 192 -