Filter
Top Products
Note
[Solaris Containers]
The number of CPUs is displayed based on a cap value when a resource pool used in non-global zone is changed from unmanaged
to managed.
- When a cap value is set, the CPU performance is calculated using the following formulas:
Number of CPUs =
cap values of CPUs
/ 100 (rounding up the number of decimal places)
When the cap values calculated using the CPU performance and the number of CPUs for L-Servers are the same as those
configured for the non-global zone, the CPU performance and the number of CPUs for L-Servers are not updated, and the
values are not changed from the configured values.
- When a cap value is not set, a hyphen ("-") is displayed.
A hyphen ("-") is displayed for the number of CPUs when a resource pool used in the non-global zone is changed from managed
to unmanaged.
Memory(Allocated Value/Define Value)
The memory capacity defined for the L-Server is displayed.
Defined Value
The memory capacity of the physical server actually allocated to the L-Server is displayed.
Allocated Value
The memory capacity defined during L-Server creation is displayed.
Note
[Solaris Containers]
When the cap value of memory is set, that value is displayed.
When the cap value of memory is not set, a hyphen ("-") is displayed.
Model(Allocated Value/Define Value)
The model name defined for the L-Server is displayed.
Defined Value
The model name of the physical server actually allocated to the L-Server is displayed.
Allocated Value
The model name defined during L-Server creation is displayed.
Type
The server type of the L-Server is displayed.
Disk type
The type of disks on the physical L-Server is displayed.
One of the following is displayed:
- iSCSI
- SAN (Storage Area Network)
PXE boot
One of the following is displayed:
- When PXE boot is configured for the physical L-Sever
"Enable" is displayed.
- 305 -