Filter
Top Products
Auto configuration
Displays whether the network device is set to be automatically set or not.
- true
- false
Redundant Configuration
The following attributes are not displayed for PRIMERGY BX900/BX400 LAN switch blades operating in IBP mode.
Group ID
The group ID is displayed.
Network Devices
Another device in the redundancy configuration is displayed.
When there are multiple devices, the names of those devices are displayed separated by commas (",").
Hardware Details Area
Launch Network Device Web UI
A link to the Web interface of the network device is displayed.
Clicking the link displays the Web interface of the network device.
Links will be displayed even for devices that the Web UI does not support, but if these links are clicked, the Web interface will
not be displayed.
Refer to the manual of the network device to confirm whether a Web interface is provided.
Port Properties Area
Port Number
The number of the port of the selected network device is displayed.
Port Name
The name assigned to the port of the selected network device is displayed.
Member Port
When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link
aggregation are displayed separated by commas (",").
When the physical port name is displayed as the port name, a hyphen ("-") is displayed.
Link Status
The operational status of the port is displayed.
One of the following is displayed:
- up
- down
- unknown
Speed/DuplexMode
The speed and duplex mode of the operating port are displayed.
Link Aggregation Group
The name of the link aggregation group to which the port of the selected LAN switch belongs.
If it does not belong to link aggregation, a hyphen ("-") is displayed.
- 294 -