Filter
Top Products
Point
- Usage cannot be changed, while the L-Server is stopped temporarily during L-Server restart.
- When power operation has been performed directly on the physical server using the ROR console or commands, without performing
power operation of the L-Server, the L-Server which was last operated will start.
- If the last L-Server that was operated has already been started on another physical server, its status will change so there is no boot
disk and it will fail to start.
17.9.3 Releasing Configuration
This section explains how to release configurations of the L-Server for usage change.
1. Change L-Server Configuration for Fixed Operation
Clear the [Automatic (when powered off)] checkbox of [Resource release] in the [Modify an L-Server] dialog, and click <OK>.
For details, refer to "17.2.1 Modifying Specifications".
2. Delete Unnecessary L-Servers
When unnecessary L-Servers exist, use the procedure in "17.4 Deleting an L-Server" to delete them.
- 227 -