Fujitsu Cloud Edition V3.1.0 Server User Manual


 
Note
When there are storage pools with and without Thin Provisioning attributes configured that have the same priority, the storage
pool that will be given priority is decided based on definition files.
For details on definition files, refer to "C.1 Definition Files Commonly Shared when Creating Virtual L-Servers" in the "Setup
Guide CE".
- Storage pool
Select a virtual storage resource registered in the specified storage pool. Create the specified size of disk resources, and allocate
them to the L-Server.
- Virtual storage
Displays virtual storage resources such as datastores as a list.
Select from the displayed virtual storage resources.
Create the specified size of disk resources from the specified virtual storage resource, and allocate them to the L-Server.
When using the virtual storage resource on which the Thin Provisioning attributes are configured, the disk resource can be
created specifying a size exceeding the actual disk space.
[Hyper-V]
When creating an L-Server or changing the configuration, a maximum of four disks can be specified at one time.
To perform addition of five or more disks, please perform an additional configuration change.
Saved disk resources that are created from virtual storage can only be connected to the L-Server when using Microsoft(R) System
Center 2012 Virtual Machine Manager.
Disk resources can be specified if the disk number [No.] is 1 or larger.
After selecting <Disk> from the resource type to use, resources that are displayed in the "Resource List" can be filtered by entering
the search conditions and clicking <Search>.
Note
When the creation of an L-Server with saved disks specified fails, if a virtual machine remains on VM management software,
remove the saved disks from the virtual machine before deleting the virtual machine from VM management software. When a
virtual machine is deleted without taking removing saved disks, the saved disks are also deleted. Disks on virtual machines can be
identified using the disk number (No.) specified when creating an L-Server.
For details, refer to "3.1 Operations for Creating or Starting L-Servers" in "Troubleshooting".
[KVM] [Solaris Containers]
Select disk storage from the resource pool to create the disk resource. Select one of Automatic, Storage pool, or Disk.
[Oracle VM]
The total size of resources is not displayed for the virtual storage in the resource list.
16.3.4 [Network] Tab
Specify the following items.
Network to connect
Configure a network resource to connect.
Clicking <Select> displays the [Select a Network Resource] dialog.
If <OK> is clicked while a network resource is selected, the network resource to connect is displayed.
The number of NICs that can be configured differs depending on the VM type.
- 186 -