Filter
Top Products
Table 17.3 Network Resource Items for Modification
Operation
L-Server Status
Physical L-Server
Physical L-
Server
(iSCSI Boot)
Virtual L-Server
Define
d
Preserved Allocated All
Define
d
Preserved Allocated
IP address change
(Admin LAN/public LAN) (*1)
Yes Yes Yes Yes
Yes
(*2)
- -
Changing network resources to
connect to a NIC or a NIC group
Yes Yes Yes -
Yes
(*2)
- -
NIC addition and deletion Yes - - -
Yes
(*2,
*4)
Yes (*5) Yes (*5)
Changing untagged VLAN
settings (use/not use)
Yes Yes Yes - - - -
Adding or deleting network
resources to connect to a NIC or
a NIC group
Yes Yes Yes - - - -
Redundancy modification
(Example: Changing the
combination of NIC1 and 2 to
NIC3 and 4)
Yes Yes (*3) Yes (*3) - - - -
Redundancy addition
(Example: Changing NIC1 to
the combination of NIC1 and 2)
Yes Yes (*3) Yes (*3) - - - -
Redundancy deletion
(Example: Changing the
combination of NIC1 and 2 to
NIC1 only)
Yes Yes (*3) Yes (*3) - - - -
*1: Changing IP addresses across subnets is not possible.
*2: IP addresses and network resources of virtual L-Servers can only be changed when the server's status is "defined".
*3: Select "Admin LAN (MAC address 1)" of the physical server that the L-Server will be located on, as the admin LAN of the physical
L-Server. When performing admin LAN redundancy for the physical L-Server, all NICs of the admin LAN for the physical server that
the L-Server will be located on must be included.
*4: For L-Servers with RHEL-KVM or RHEL-Xen selected for the VM type, the NIC cannot be added or deleted.
*5: For L-Servers with VMware, Hyper-V, Solaris Containers, or RHEL-KVM selected for the VM type, NICs can be added or deleted.
Note
- Modifications to L-Server specifications have no effect on the settings of the OS installed on the L-Server. Modify the network settings
of the OS referring to the IP address and network information of the modified L-Server.
- For physical L-Servers, the position of the NIC used for the admin LAN cannot be changed.
- After deployment of L-Servers, do not change the labels for network resources using port groups on VMware.
When the label for a network resource to use is changed accidentally, the new L-Server deployment will fail.
Use the following procedure to change network settings.
- 205 -