Filter
Top Products
A number between 5 and 2000 can be specified.
By default, "20" is set when enabling a dynamic memory when L-Server is created.
Memory Weight (Optional)
Specify the memory allocation priority.
It is possible to specify it for Hyper-V.
A number between 0 and 10000 can be specified.
If left blank, "5000" is set when creating an L-Server.
Startup RAM (Optional)
Specify the amount of an initial memory.
It is possible to specify it for Hyper-V.
Enter a number between 0.1 and memory capacity.
By default, memory capacity is set when enabling a dynamic memory when L-Server is created.
Dynamic Memory (Optional)
It is possible to specify it for Hyper-V.
Specify "true" when enabling a dynamic memory.
Specify "false" when disabling a dynamic memory.
By default, this information is different depending on an amount of an initial memory and a set value of the memory
buffer.
"True" is set when the amount of an initial memory or the memory buffer has already set.
Nothing is set when the amount of an initial memory and the memory buffer are unset. Enter the CPU and memory information,
and click <Next>.
d. Enter NIC information.
NIC Number
Enter when the server type is "VM".
Enter the number of NICs.
Enter a number between 1 and 10.
[Xen]
Enter a number between 1 and 15.
[Oracle VM] [RHEL-KVM]
Enter a number between 1 and 8.
[Solaris Containers]
Enter a number between 0 and 8.
Enter the NIC information, and click <Next>.
e. Enter the disk information.
Disk
Enter the disk capacity, in units of GB.
Enter a number in the following range:
0.1 to 2048 (GB)
[Xen]
0.1 to 999.9 (GB)
[Solaris Containers]
0.1 to 9600 (GB)
- 157 -