Filter
Top Products
Type
Set the network resources type to create using the following option buttons:
When creating the public LAN, a network resource name and a VLAN ID must be entered.
When creating a network resource for the admin LAN, a network resource name, a VLAN ID, a subnet address, and a subnet
mask must be entered.
When creating a network resource for iSCSI boot, a network resource name, a VLAN ID, a subnet address, and a subnet mask
must be entered.
- Public LAN
- Admin LAN
- iSCSI boot
Detail configuration
Make settings to suit usage.
- Use configured virtual switches.
Select this checkbox to use a virtual switch that was set up beforehand.
Clear this checkbox if VLAN auto-configuration is to be used for the external port of the LAN switch blade.
- Automatically configure VLANs for the uplink ports
Select this checkbox if VLAN auto-configuration is to be used for the external port of the LAN switch blade.
VLAN ID/Uplink port settings
Perform the settings for VLAN IDs and uplink ports.
VLAN ID
Specify the VLAN ID to allocate to the LAN switch blade and virtual switch. Select a VLAN ID allocated to the uplink port
of the LAN switch blade, or enter a number. Specify a pre-designed VLAN ID.
Enter an integer between "1" and "4094".
- For external networks including blade servers
Select the VLAN ID of an uplink port.
- For internal networks or external networks with rack mount servers only:
Enter a VLAN ID.
Specifying VLAN IDs and clicking <Setting> displays the [Define VLAN ID/Uplink port settings] dialog.
Uplink port settings (Chassis/LAN Switch/Position/Port/LAG Name) (Optional)
If you connect an external network to an L-Server, perform the settings for the internal ports and virtual switches of the LAN
switch blade to enable communication for the specified ports.
Information for an uplink port consists of the following information.
- Chassis name
Displays the chassis name for the external connection port.
- LAN Switch
Displays the switch name for the external connection port.
- Location to mount
Displays the slot number in the chassis for the external connection port.
- Port
Displays the port number for the external connection port. If the external port is a link aggregation group, the port numbers
of the member ports are displayed, separated by commas (",").
- 139 -