Filter
Top Products
192.168.0.11 = 192.168.10.11,172.16.0.11
192.168.0.12 = 192.168.10.12,host01
5.3 Storage Management Software
In the following cases, it is necessary to register storage management software with Resource Orchestrator for coordination.
- When the server type is "Physical"
- When using RHEL5-Xen as server virtualization software
Note
For storage management software, only PRIMECLUSTER GDS can be coordinated, when using RHEL5-Xen.
Use the following procedure to register storage management software:
1. Decide the storage environment.
2. Configure the storage environment using storage management software which can be registered.
The following storage management software can be registered with Resource Orchestrator:
- ETERNUS SF Storage Cruiser
- Data ONTAP
- PRIMECLUSTER GDS
- EMC Navisphere Manager
- EMC Solutions Enabler
For details on configuration of storage environments, refer to "D.1 System Configuration" in the "Design Guide CE".
3. When registering EMC Navisphere Manager or EMC Solutions Enabler as storage management software, it is necessary to specify
the installation folder of Navisphere CLI or SYMCLI in the definition file for EMC storage.
emcpath.conf
4. Register storage management software for coordination with Resource Orchestrator.
Execute the rcxadm storagemgr register command to register storage management software with Resource Orchestrator.
For details on the rcxadm storagemgr register command, refer to "5.17 rcxadm storagemgr" in the "Reference Guide (Command/
XML) CE".
5.4 When using Blade Servers
This section explains how to register resources when using blade servers.
When using blade servers, use the following procedure to register resources:
- Register Chassis
- Register blade servers
- Register LAN switch blades
- Configure VLANs on LAN switch blades
5.4.1 Registering Chassis
This section explains how to register a chassis.
- 26 -