Filter
Top Products
physical LAN segment
The physical LAN segment set for the network resource is displayed.
When no physical LAN segment is set, a hyphen ("-") is displayed.
The physical LAN segment item will not be displayed if no server NIC has been defined.
Excluded IP List
Start IP Address
The start address of the IP addresses to be excluded from automatic configuration is displayed.
End IP Address
The end address of the IP addresses to be excluded from automatic configuration is displayed.
External Connection List
Chassis Name
The chassis name is displayed.
Switch Name
The switch name is displayed.
Port Number
The external connection port number of the LAN switch blade is displayed.
For link aggregation, the physical port numbers of the member ports that constitute the link aggregation are displayed.
A hyphen ("-") is displayed if the link aggregation configuration has been released.
Link Aggregation Group
If link aggregation, then the link aggregation group name is displayed.
A hyphen ("-") is displayed if a physical port.
VLAN Type
The VLAN type is displayed.
- When used as Tagged VLAN
"tagged" is displayed.
- When used as Untagged VLAN
"untagged" is displayed.
- When VLAN is not used
"none" is displayed.
Status of virtual switch automatic configuration
The following information is displayed when automatic network configuration has been performed on the target of network resource
automatic configuration or when a VM host on which automatic network configuration has been performed exists in the cluster.
Cluster Group
The cluster is displayed.
VM host name
The VM host name is displayed.
VM Type
The VM Type (VMware or Hyper-V) is displayed.
- 329 -