Filter
Top Products
If you specify a resource folder name, one's own L-Server can be included in the resource folder. In the following cases, the L-Server
may be allocated to the same physical server, regardless of whether exclusive operation is specified:
- If no other VM hosts that meet the conditions for exclusive operation can be found, such as when there are no VM hosts in the
VM pool that have enough free space to install an L-Server
- If the HA function or automatic re-installation function (examples: VMware HA or VMware DRS) of the VM product is enabled
Note
When an operation that puts a resource that has been configured for exclusive operation outside the access scope of users, the name
of the resource will only be displayed on the screen for changing specifications or definitions.
Startup priority
With L-Servers, when performing batch power operations in a resource folder or a tenant, configure the priority for the L-Server.
Set a number between 1 and 256. Smaller values indicate higher priority. If omitted, "128" is set.
When not performing batch power operations, check the [Exclude from batch power operations] checkbox.
16.3.3 [Disk] Tab
Disk
Click <Add>, and specify the following items for each disk.
Size * Number of Disks
- Size
Enter a number with up to one decimal place, in units of gigabytes. Values of 0.1 or larger can be specified.
[VMware] [Hyper-V]
Specify a number between 0.1 and 2048.
[Oracle VM]
Specify the size within the range of 1 to
the_resource_size_of_the_hardware_on_which_the_VM_hosts_operate
.
Information
When creating an L-Server, even if the size of the system disk is specified, if the specified size differs from that of the deployed
cloning image, the size will be changed to that of the deployed cloning image.
- Number
Clicking <Add> will display the [Disk Definitions] dialog, and then specify the number of disks to add. Specify a number 1
or larger.
[Solaris Containers]
Only specify one.
Resource type
[Windows] [Linux] [Solaris] [VMware] [Hyper-V] [Xen] [Oracle VM]
Specify the disk to allocate to the L-Server.
Select from the following items.
- Automatic assignment
Select a suitable virtual storage resource from those registered in the appropriate storage pool. Create the specified size of disk
resources, and allocate them to the L-Server. Set [Automatic] for the default value.
- 185 -