Filter
Top Products
2. Set the items required in each tab, and click <OK> to create the L-Server.
Note
- Each item to set has an upper limit.
Even when valid values are specified, the creation of an L-Server may fail depending on the availability of resources in resource pools,
the hardware configuration, and the VM management software specifications.
- When creating a virtual L-Server, if there are any values configured in the VM specific information definition file, those values are
used.
For details on VM specific information definition files, refer to "C.1 Definition Files Commonly Shared when Creating Virtual L-
Servers" and "Chapter 8 Creating Definition Files" in the "Setup Guide CE".
[Xen]
- When using RHEL5-Xen, L-Server creation cannot be performed using the ROR console. Use the rcxadm lserver command.
For details on the rcxadm lserver command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
[Hyper-V]
- When using dynamic memory and memory weight, Windows Server 2008 R2 Service Pack 1(SP1) or later must be applied to the VM
host, and SCVMM must be upgraded to System Center Virtual Machine Manager 2008 R2 Service Pack 1(SP1) or later. If there are
no VM hosts or SCVMM with SP1 applied, creation of an L-Server for which dynamic memory is enabled, or memory weight is
specified will fail.
[Solaris Containers]
- Calculate the cap value to configure for the non-global zone from the number of CPUs and the CPU performance.
For details, refer to "C.7.6 Creating an L-Server" in the "Setup Guide CE".
16.3.1 [General] Tab
Name (Label)
Enter a name for the L-Server.
[VMware] [Hyper-V]
Enter up to 64 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric characters
(upper or lower case), underscores ("_"), periods ("."), and hyphens ("-").
[Xen] [Oracle VM]
Periods (".") cannot be used.
[KVM]
Enter up to 64 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric characters
(upper or lower case), underscores ("_"), or hyphens ("-").
[Oracle VM]
Enter the location using 32 characters or less.
Note
Do not enter more than 32 characters.
[Solaris Containers]
Enter up to 52 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric characters
(upper or lower case), underscores ("_"), periods ("."), and hyphens ("-"). Enter up to 63 characters beginning with an alphanumeric
character (upper or lower case), and including alphanumeric characters (upper or lower case), underscores ("_"), periods ("."), and
hyphens ("-"). However, names which start with "SUNW" cannot be used.
The name "global" cannot be used when the configuration uses the same name for both a virtual L-Server and a VM. For the
- 179 -