Filter
Top Products
Note
Immediately after a snapshot is restored, there may be differences between the configuration of VM guests managed by L-Server and
those managed by VM management software.
The differences in VM guest configuration are reflected on the configuration of the L-Server by periodic queries made to the VM
management software.
For details on reflection of L-Server configuration by periodic queries, refer to "17.2 Modifying".
When changing the values for server redundancy for an L-Server to which a virtual machine is already allocated, the virtual machine is
not changed, only L-Server attributes are changed.
[Solaris Containers]
If the CPU's CAP value has not been set, both "Number of CPUs" and "CPU performance" must be changed when changing the CPU
settings.
17.2.2 Modifying the Basic Information
This section explains how to modify the basic information of L-Servers. Use the following procedure to modify the basic information of
L-Servers:
Note
- Immediately after a snapshot is restored, there may be differences between the configuration of VM guests managed by L-Server and
those managed by VM management software.
The differences in VM guest configuration are reflected on the configuration of the L-Server by periodic queries made to the VM
management software.
For details on reflection of L-Server configuration by periodic queries, refer to "17.2 Modifying".
- Changing an L-Server name changes the VM guest name on server virtualization software as well.
For associating an L-Server name with a VM guest name, refer to "Association of an L-Server Name with a VM Guest Name" in
"16.1 Creation Using an L-Server Template".
- To change an L-Server name, the L-Server must be stopped.
When the L-Server power status is on, the L-Server name cannot be changed.
- Change the names of physical L-Servers when the power status of the L-Server is OFF.
When the physical L-Server power status is on, the L-Server name cannot be changed. For virtual L-Servers, only when the VM
product is VMware, can the L-Server name can be changed while the L-Server power status is on. For details, refer to the manuals of
VM products.
1. Right-click the target L-Server in the orchestration tree, and select [Change Settings]-[Basic Information] from the popup menu.
The [Resource Change Setting] dialog is displayed.
2. Change the items you want to modify.
3. Click <OK>.
The basic information of the L-Server is modified.
From the command-line, execute rcxadm lserver modify.
For details on the rcxadm lserver modify command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
17.2.3 Attaching and Detaching Disks
This section explains how to modify the disk configuration of an L-Server.
- 198 -