Filter
Top Products
Operation
The methods for operating physical servers after usage changes are as follow.
Perform the procedure before performing any operations.
- When using multiple L-Servers, switching between them, on a single physical server
Usage can be changed by repeating the following procedure.
1. Confirm the Physical Servers to Use
2. Stop the Source L-Server for Usage Change
Stop L-Servers operating on physical servers which are required for change usage.
For details, refer to "17.1.2 Stopping an L-Server".
3. Start the Destination L-Server for Usage Change
For details, refer to "17.1.1 Starting an L-Server".
After changing the configuration, the L-Server before changing cannot be operated, until the new L-Server has finished starting.
- When using multiple L-Servers, switching between them, on unused physical servers in a server pool
Usage can be changed by repeating the following procedure.
1. Confirm the Server Pool
Confirm whether an unused physical server exists in the server pool.
2. Start the Destination L-Server for Usage Change
For details, refer to "17.1.1 Starting an L-Server".
After changing the configuration, the L-Server before changing cannot be operated, until the new L-Server has finished starting.
17.9.2 Operation
The methods for operating physical servers after usage changes are as follow.
Perform the procedure given in "17.9.1 Configuring L-Servers for Usage Change" before performing any operations.
- When using multiple L-Servers, switching between them, on a single physical server
Usage can be changed by repeating the following procedure.
1. Stop the Source L-Server for Usage Change
Stop L-Servers operating on physical servers which are required for change usage.
For details, refer to "17.1.2 Stopping an L-Server".
2. Start the Destination L-Server for Usage Change
For details, refer to "17.1.1 Starting an L-Server".
After changing the configuration, the L-Server before changing cannot be operated, until the new L-Server has finished starting.
- When using multiple L-Servers, switching between them, on unused physical servers in a server pool
Usage can be changed by repeating the following procedure.
1. Confirm the Server Pool
Confirm whether an unused physical server exists in the server pool.
2. Start the Destination L-Server for Usage Change
Start the destination L-Server for usage change.
For details, refer to "17.1.1 Starting an L-Server".
After changing the configuration, the L-Server before changing cannot be operated, until the new L-Server has finished starting.
- 226 -