Filter
Top Products
- When saving a file in CSV format from the system configuration template, or exporting a system configuration file from the ROR
console
Export will be performed using the latest file format given in "B.2 File Format".
The following operations, usually performed from the ROR console, can be equally performed using the pre-configuration function.
- Registration
- "5.1 Registering VIOM Coordination"
- "5.4 When using Blade Servers"
- "5.5.2 Registering LAN Switches"
- "5.2 Registering VM Management Software"
- "5.10 Registering Power Monitoring Devices" (*1)
- "5.11 Registering Admin LAN Subnets"
- "5.4.4 Configuring VLANs on LAN Switches"
- "5.5.3 HBA address rename Settings" (*2)
- "Chapter 8 Configuring Monitoring Information" in the "Setup Guide VE"
- "Chapter 18 Server Switchover Settings" in the "User's Guide VE"
- Modification
- "6.1 Changing Admin IP Addresses" (*3)
- "7.1.11 Changing Admin LAN Subnets"
- "7.1.2 Changing Server Names"
- "7.1.3 Changing Admin IP Addresses" (*3)
- "7.1.4 Changing SNMP Communities"
- "7.1.5 Changing Server Management Unit Configuration Settings"
- "7.1.7 Changing VM Host Login Account Information"
- "7.1.8 Changing the VLAN Settings of LAN Switch Blades"
- "7.1.9 Changing HBA address rename Settings" (*2)
- "7.1.10 Changing Boot Options"
- "7.3 Changing VIOM Registration Settings"
- "7.4 Changing LAN Switch Settings"
- "7.7 Changing VM Management Software Settings"
- "7.8 Changing Power Monitoring Environment Settings"
- "7.9 Changing Monitoring Information Settings"
- "18.3 Changing Server Switchover Settings" in the "User's Guide VE"
*1: To start collecting environment data, the collection settings should be manually set from the ROR console's option dialog.
*2: Restart all the managed servers that were either registered or modified following an import operation.
*3: The pre-configuration's scope of configuration is the same as that of the ROR console.
Moreover, the pre-configuration function can perform the same labels and comments settings as those available in BladeViewer. Those
settings are described in "Chapter 4 BladeViewer" and "4.5.1 Listing and Editing of Labels and Comments".
- 98 -