Filter
Top Products
- Screen scrolling
- Scroll button
- Map drag and drop
- Navigation map drag and drop
- Maximizing and minimizing of the display area
- Configuring automatic update to show the latest status
- Updating to show the latest status
- Hiding of the navigation map
- Hiding of display filter options
- Showing or hiding of the following information
- Resource descriptions
- Network links
- VLANs
- Resetting to initial display
- Highlighting of a selected resource
- Showing or hiding of details for the following resources
- Servers (including VM hosts)
- LAN switches
- VM guests
- Virtual switches
11.2 Preparations
The following preparations are required to add display content to the Network Map.
1. Register LAN switches (LAN switch blades included in a chassis or external switches)
For details on the registration method, refer to "5.5.2 Registering LAN Switches".
2. Register network devices or physical network links
For details on the registration method, refer to "5.7 Registering Network Devices".
Note
- If no LAN switch blades have been registered, only network links between external LAN switches will be displayed. If only one
external switch is registered, no network links will be displayed at all.
- If a non-supported LAN switch is registered, network links may not be properly displayed for that switch.
- The Network Map cannot display network links between BX600 GbE Switch Blade 30/12 and the following LAN switch blades:
- PY CB Eth Switch/IBP 1Gb 36/12
- PY CB Eth Switch/IBP 1Gb 36/8+2
- PY CB Eth Switch/IBP 1Gb 18/6
- Network links between two supported LAN switches may not be displayed properly if an unregistered or un-supported LAN switch
is placed between them.
- 104 -