Filter
Top Products
When the following conditions are met on an L-Server with a configuration definition already been created (defined), the L-Server
will not be the target of powering on.
- The cloning image is specified
- Boot disks (system volumes) are dynamically created from virtual storage
- The L-Server is a virtual L-Server on RHEL-KVM
When an L-Server uses resources in another tenant, the L-Server will not be the target of powering on.
From the command-line, execute rcxadm folder start.
For details on the rcxadm folder start command, refer to "3.5 rcxadm folder" in the "Reference Guide (Command/XML) CE".
Stopping an L-Server in a Resource Folder
Use the following procedure to stop an L-Server in a resource folder.
1. Right-click the target resource folder or tenant in the orchestration tree, and select [Power]-[OFF] from the popup menu.
The [Power OFF L-Servers] dialog is displayed.
Point
A list of L-Servers that are targets of the power operation is displayed.
They are displayed in order with low priority.
Even if the list of L-Server is not displayed, the power supply can be operated.
2. Click <OK>.
L-Servers in a resource folder are stopped in the order of priority.
From the command line, execute rcxadm folder stop.
For details on the rcxadm folder stop command, refer to "3.5 rcxadm folder" in the "Reference Guide (Command/XML) CE".
Restarting an L-Server in a Resource Folder
Use the following procedure to restart an L-Server in a resource folder.
1. Right-click the target resource folder or tenant in the orchestration tree, and select [Power]-[Reboot] from the popup menu.
The [Reboot L-Servers] dialog is displayed.
Point
A list of L-Servers that are targets of the power operation is displayed.
The display order is in descending order of priority.
Even if the list of L-Server is not displayed, the power supply can be operated.
2. Click <OK>.
L-Servers in a resource folder are restarted in the order of priority.
From the command-line, execute rcxadm folder restart.
For details on the rcxadm folder restart command, refer to "3.5 rcxadm folder" in the "Reference Guide (Command/XML) CE".
17.2 Modifying
This section explains how to perform L-Server configuration changes.
When modifying configurations for an L-Server for which only a configuration definition was created, refer to "17.8.2.3 Modifying
Configuration Definition Information".
- 193 -