Filter
Top Products
Configuring Rights
Figure 4-43. Configuring Proxy Filters to limit access for the Guest Access Access Policy
Step 3.
To create the filters you need, click New Filter.... See “HTTP Proxy Filters” on page 4-75 for details
on creating HTTP proxy filters.
Step 4. Select Enabled from the drop down field to specify that filtering should be enabled. (This takes
effect when you
Save the Proxy Filter definition.)
Step 5. Enter the ports you want the 700wl Series system to monitor for HTTP traffic.
Step 6. Select and reorder (if necessary) the Proxy filters you want to use for this Access Policy. Filters are
evaluated in the order that they appear in the HTTP Proxy filters list, and when a packet matches
a filter, it is immediately redirected to the appropriate destination. Therefore, an incorrect
ordering of HTTP Proxy filters could cause some filters never to be evaluated. In the example, the
most specific filters are evaluated first, then the more general filters.
Step 7. Click Save to save the Access Policy with this set of Proxy filter specifications.
4-84 HP ProCurve Secure Access 700wl Series Management and Configuration Guide