Filter
Top Products
Configuring the Network
Caution: Restoring a saved private key will invalidate an SSL certificate based on the current (different)
private key.
Restoring the Default SSL Certificate
If the private key is lost or the certificate is corrupted or invalidated, you can revert to the default SSL
certificate issued by HP ProCurve itself as the Certificate Authority (CA).
To restore the default SSL certificate and private key, click
Reset to Default, then click Save.
Note: Save saves all changes made on any of the sub-tabs since the last Save. Cancel discards all
changes on all sub-tabs since the last save.
Configuring Network Interfaces
You use the Interfaces tab of Network Setup to configure the interfaces of your Access Controllers or
Integrated Access Managers. You can configure:
• The transmission speed and duplex setting for each port on the Access Controller or Integrated Access
Manager. You can also set the speed and duplex setting for the uplink port on an Access Control Server.
• The subnet address range for each Access Controller or Integrated Access Manager port.
Configuring the Port Speed and Duplex Settings
The Connection Type settings let you specify the speed and duplex setting for each I/O port. Port Settings
are available on the
Speed/Duplex tab of the Interfaces page for all system components.
The
Connection Type field shows the configured connection type, and the type of the actual connection
detected at the port, if different from the configured type (shown in parentheses). In Figure 6-17, on
page 6-35, all ports are configured for autoselect (allowing automatic negotiation to determine the port
settings). For the ports where no media is connected, the value in parentheses is
none. If the port is
configured for a specific connection type, and the actual connection matches the configured type, the
connection type is displayed only once (no parentheses).
The Connection Type field provides a drop-down list with the possible settings allowed for the port.
Figure 6-16 shows an example of a drop-down list. The items in the list depend on the type of port.
6-34 HP ProCurve Secure Access 700wl Series Management and Configuration Guide