Filter
Top Products
Configuring the Network
With the exception of the Access Control Server IP address and shared secret, Access Controllers are
configured centrally from the Administrative Interface of the Access Control Server or Integrated Access
Manager. From the Administrative Console you can configure and delete Access Controllers, as well as
organize them into folders.
Note:
Once the Access Control Server has recognized and is managing an Access Controller, you should
not attempt to configure the Access Controller directly through the CLI, as doing so may conflict with the
settings maintained for the Access Controller by the Access Control Server.
» To
Components List, or click the pencil icon (
is closed, you will need to open the folder before you can select the Access Controller.
edit an Access Controller’s settings, click the name of the Access Controller in the System
) to the far right. If the Access Controller is in a folder that
The Edit Access Controller page appears. See Figure 6-5.
Figure 6-5. Edit Access Controller Page
The fields on the Edit Access Controller page show the current setting for the Access Controller. This
includes the following information:
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 6-11