Filter
Top Products
----- ---------------- ------- ------
Command Line Interface
<stance>Deny</stance>
</ipsec>
<pptp>
<stance>Deny</stance>
<mppe_stance>Accept</mppe_stance>
<mppe_bits>0</mppe_bits>
<mppe_stateful>False</mppe_stateful>
<min_mschap>0</min_mschap>
<allow_pap>False</allow_pap>
<allow_chap_md5>False</allow_chap_md5>
</pptp>
... (client rights abbreviated to save space)
</client_rights>
Active Sessions
Protocol Source Destination Xmit Recv Idle
------------------- -----
UDP Client: 42.23.184.102:137 42.0.0.1:137 4842 2856 23s
TCP Client: 42.23.184.102:1223 10.205.2.25:443 1169 921 1m17s
TCP Client: 42.23.184.102:1221 1.1.1.1:443 951 1945 1m28s
Actual: 42.23.184.102:1221 10.205.2.25:443
logoff client {all | mac < mac-address> }
Logs off a client or all clients. You are asked to confirm this action.
all Keyword the specifies that all clients should be logged off.
<mac-address> MAC (Ethernet) address of the client to log off. Specified in the format:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx (colons are optional).
System Backup, Upgrade and Shutdown Commands
The following commands support the backup of the current system configuration, and restore of a saved
configuration, downloading new software versions, and rebooting, shutting down the system, or
resetting it to its factory default configuration.
Backup and Restore
create backup
Creates a backup image. Because this will temporarily disconnect all clients, you are prompted to
confirm that you want to do this. The following is an example of the messages that appear on an
Integrated Access Manager:
Creating a system backup will momentarily shut down this Integrated Access Manager.
All client machines will be temporarily disconnected.
Are you sure you want to briefly shut down the system
and create a backup [n]?
HP ProCurve Secure Access 700wl Series Management and Configuration Guide A-25