Filter
Top Products
Configuring the Network
Access Controller Advanced Configuration Options
The following settings appear on this page if you are configuring an Access Controller or an Integrated
Access Manager. They do not appear if you are configuring an Access Control Server.
Bridging
A 700wl Series system provides filtering and redirection of IP packets at Layer 3. With bridging, you can
specify certain Layer 2 packets to be copied across an Access Controller to the clients. Bridging is disabled
by default.
Caution: Any modifications to the bridging settings will log off all clients.
To
Enable Ethernet Bridging for this Access Controller, do the following:
Step 1. From the Bridging drop-down field, select Enabled.
Step 2. Specify the type of Bridged traffic:
Table 6-6. Bridging options
Protocol Description
Cisco Discovery Protocol Enables CDP packets through this Access Controller.
This Layer 2 protocol is used by Cisco network hardware and
software to manage a network of Cisco devices.
Wireless Network Access Protocol Enables WNMP packets through this Access Controller.
This Layer 2 protocol is used by Symbol Technologies, Inc.
network hardware to manage a network of Symbol devices.
AppleTalk Enables AppleTalk packets to be passed through this Access
Controller.
IPX/802.3 (Ethernet Raw) Enables Novell 802.3 IPX Ethernet traffic
IPX/802.3 (Ethernet) Enables IEEE standard 802.3 IPX traffic.
IPX/802.2 (LLC and SNAP) Enables IPX traffic that includes the 802.2 Logical Link Control
(LLC) header and the Subnetwork Access Protocol (SNAP)
header.
IPX/Ethernet II encapsulation (Type II) Enables IPX traffic encapsulated using the standard Ethernet 2
header
SLP (Service Location Protocol) Enables Novell SLP traffic to be passed through this Access
Controller/
Other: Enables bridging of other Layer 2 traffic as specified in the text
field that follows.
You can create a traffic specification using arbitrary tcpdump
syntax. Any traffic specifications (tcpdump-enabled packets)
you enter here are in addition to those enabled by checking the
options described above.
See Appendix B, “Filter Expression Syntax” for a description of the tcpdump syntax.
6-24 HP ProCurve Secure Access 700wl Series Management and Configuration Guide