Filter
Top Products
Configuring Authentication
Configuring a RADIUS Authentication Service
Note: The 700wl Series system Access Control Server must be configured as a RADIUS client on
your RADIUS server.
To configure the 700wl Series system to use a RADIUS database for user authentication:
Step 1. Click the Rights button in the Navigation bar, then go to the Authentication Policies tab.
Step 2. Click the Authentication Services link in the left panel to go to the Authentication Services page.
Step 3. On the Authentication Services page, click New Service... button.
Step 4. Click the RADIUS link in the left-hand panel of the page.
The New Authentication Service - RADIUS page appears (see Figure 5-7).
The Edit Authentication Service - RADIUS page is almost identical to the New Authentication
Service - RADIUS page, except that the page and settings are displayed for the Authentication
Service you have selected. Also, a
Save As Copy button is provided.
Figure 5-7. Creating a New Authentication Service - RADIUS
Along with the authentication results, you can obtain the user’s group affiliation from the authentication
process. The returned group information will be used to match the user to an Identity Profile in the
Rights Assignment table. This assumes you have created Identity Profiles that match the groups that may
be returned from the authentication process.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 5-19