Filter
Top Products
System Status
Table 3-6. Active Client detail information
Information Description
Current Access Information about the Access Controller through which the user is connected:
Controller
• Name of the Access Controller (by default the same as the IP address).
• IP address of the Access Controller.
• Slot and port through which the user is connected (or the port only if the unit does not provide
multiple slots).
IP Security The type of IP Security in place.
Note: This item appears only if encryption is allowed at the location where the client is
connected.
Client VLAN ID The VLAN ID on packets from the client
Tagged VLAN ID The VLAN ID added to packets based on the Access Policy
Sessions The number of sessions this client currently has running.
Idle Time The amount of time, in minutes and seconds, that this client has been idle.
Rights Expiration The amount of time, in days, hours, and minutes until this client‘s rights expire. If the client‘s
rights do not expire, this column will show —N/A“.
» Click View User Rights to see the details of the rights for this user. The definition for this client are
displayed in XML format below the rest of the status information, as shown in
Figure 3-7.
» Click View Log to display the log file entries for this user, filtered using the client MAC address as the
search string. See “Viewing the Session Logs” on page 9-6 for more information.
» Click Refresh User Rights Now to update this client’s rights.
» Click Logout User Now to log this client off the 700wl Series system.
» Click Done top go back to the Client Status page.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 3-11