Filter
Top Products
Setting up Wireless Data Privacy
Step 3.
Fill in the information in this form:
a. Type the name in which the certificate should be granted. This can be an individual name or
a title such as “Wireless Admin.”
b. Type the email address for the certificate contact.
c. Type your state or province. This is typically a two-character abbreviation.
d. Type your two-character ISO country code (US for the United States, UK for the united
Kingdom, and so on). You can access the list of country codes at the following URL:
http://ftp.ics.uci.edu/pub/websoft/wwwstat/country-codes.txt
e. Type your organization name. This is the name that will be published on the certificate.
Step 4. Click Generate CSR to generate the certificate request.
This produces a PKCS#10 certificate request that you can paste into a CA’s certificate request
form. Figure 7-4 is an example of a generated request.
Figure 7-4. The Generated CSR request
Step 5.
Connect to your Certificate Authority web site, and start the certificate request process.
Because you have generated a PKCS#10 certificate request, you should go to the Server
Certificate Enrollment page, where you can paste your certificate request. In a Netscape
Certificate Management System, for example, this is the SSL Server page.
Caution: You must generate a PKCS#10 certificate request through the Integrated Access
Manager or Access Control Server Administrative Console, and connect to the CA web site
from the same system on which you are running the Administrative Console. You cannot
request a certificate through the CA‘s manual request interface. Certificates you receive through
that process will not work with the 700wl Series system.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 7-7