Filter
Top Products
System Status
Table 3-8. Session Status Filtering Parameters
Filter by: Details
Access Controllers Lets you display only sessions for a selected Access Controller. You select the Access
Controller from the drop-down list.
Default is the first Access Controller in the list.
Port Lets you display only sessions for a selected port or for all ports of the selected Access
Controller. You select the port from the drop-down list.
Default is All Ports.
Rows per Page Lets you specify the number of rows to be displayed on a page. You can choose 25, 50,
75, or 100 rows per page. Additional results appear on successive pages.
The default is 25 rows per page.
Auto Refresh Lets you specify how often the Clients status display should be refreshed:
• Auto Refresh Off.
• Refresh every 15 seconds.
• Refresh every 30 seconds.
• Refresh every 45 seconds.
• Refresh every 60 seconds.
Default is Auto Refresh Off
Viewing License Information
The License Information page shows the license, copyright, and trademark information for all third-party
software used by the 700wl Series system.
» To view version and license information, click the License Information tab on the Status pages.
Figure 3-9 shows the License Information page.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 3-15