Filter
Top Products
Configuring Rights
• To select all Time Windows in the list, select the checkbox next to the Locations column
heading. Clicking this checkbox a second time removes the checks from all Time Windows in
the list.
• To remove a Time Window from the profile, click its checkbox to remove the check.
Step 5. Click Save to save this Connection Profile. If you are editing a Connection Profile, this replaces
the original Connection Profile with the modified Connection Profile definition.
To add the modified Connection Profile as a new Connection Profile, leaving the original
Connection Profile unchanged, click
Save As Copy. The Save As Copy button is available only on
the Edit Connection Profile page.
The page remains displayed so you can make additional changes.
Click
Cancel to return to the previous page without making any further changes.
Locations
A Location is a named set of physical connections (Access Controller ports) into the 700wl Series system.
A Location can include all ports on the Access Controller, or it can include just a single port.
» To view the list of Locations currently defined in the 700wl Series system, click the Locations link on
the main Connection Profiles page. The Locations page appears, as shown in Figure 4-17.
Figure 4-17. Locations List
The Location list shows the following information about each Location:
Table 4-12. Locations Page Field Definitions
Field Description
Name The descriptive name for the Location.
Details The definition of the Access Controllers and ports included in the Location.
» To edit Location, click the Location name in the Name column, or click the pencil icon at the end of the
row. This takes you directly to the Edit Location page to edit the entry for this user (see “Creating or
Editing a Location” on page 4-36).
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 4-35