Filter
Top Products
System Maintenance
Note: You cannot restore from the internal backup image. You can only restore from an external
file. Therefore, you must save the backup image to a file.
» To back up a system configuration, click the Backup & Restore tab under the Maintenance button.
The Backup & Restore page appears, as shown in
Figure 8-7.
Figure 8-7. The Backup & Restore tab
The Backup & Restore page displays the status of any backups created on the component you have
selected, as well as options to create or restore a backup.
The
Last Backup field displays the date and time that the current backup image (residing in the unit) was
created, if any.
If a backup image exists, you can save it to a file, if you have not done so previously. When you create a
new backup image, it will overwrite the previous image. If no image exists, the
Save Backup As... button
will not be available.
Creating the Backup Image
To create the backup image, do the following:
Step 1. Click Create Backup Now.
A confirmation page appears, as shown in Figure 8-8.
8-14 HP ProCurve Secure Access 700wl Series Management and Configuration Guide