Filter
Top Products
System Status
Figure 3-3. Access Control Server Tab for the Primary Access Control Server in a redundant configuration
Viewing Access Controller Status
The Access Controller status table displays the following information about each Access Controller:
Table 3-2. Active Access Controllers Display
Column Description
Component Name The name assigned to the Access Controller, see —Configuring Access Controllers“ on
page 6-10. Click on the Component Name to view the status details for the Access
Controller.
IP Address IP Address of the Access Controller.
Clients The number of clients currently connected to the 700wl Series system through this
Access Controller.
Installed Software
Alternate Version
The version number of the 700wl Series system software currently running on the
Access Controller.
The alternate version of the 700wl Series system software is shown in smaller font below
this.
Connection Time
Up Time
The length of time the unit has been connected to the Integrated Access Manager or
Access Control Server, in days, hours, and minutes. If this Access Controller is not
currently reachable, this will show —Not connected“.
The length of time the unit has been operational since the last reboot.
Viewing Access Controller Status Details
To view the full status information for an Access Controller, click the Access Controller’s Component
Name
in the Access Controller status table. This displays the Access Controller Detail page, as shown in
Figure 3-4.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 3-5