Filter
Top Products
Setting up Wireless Data Privacy
The default is to have addresses assigned by a DHCP server.
» To configure the IP Address assignment method for the tunneling protocols, click the VPN icon in the
Navigation bar at the top of the Administrative Console, then click the I
P Address Assignment tab. This
displays the IP Address Assignment page, as shown in
Figure 7-9.
Figure 7-9. The IP Address Assignment tab
Step 1.
In the System Components List, select the Access Controller for which you want to configure IP
addressing.
Step 2. On this page, enter values into the fields as described in Table 7-2 below.
The fields under the
IP Address Assignment tab are as follows:
Table 7-2. IP Address Assignment settings
Field Description
Method Select the method you want to use to assign inner-tunnel IP addresses from the
drop-down menu
• Select DHCP to assign the address via an external DHCP server
• Select Client IP to have the Access Controller assign the address from a
range of addresses you provide
IP Address Range If you selected Client IP, type the beginning and ending addresses of the range
you want to use into the fields provided
Step 3. To save the settings, click Save.
VPN Tunneling and Network Address Translation
The use of VPN tunneling affects IP addressing and Network Address Translation (NAT). If PPTP or
L2TP is enabled Access Policy, then addressing works as follows:
7-12 HP ProCurve Secure Access 700wl Series Management and Configuration Guide