Filter
Top Products
Configuring the Network
Table 6-5. Basic Setup tab fields
Field Description
Secondary DNS The IP address of the secondary DNS server
Primary WINS The IP address of the primary WINS server
Secondary WINS The IP address of the secondary WINS server
Step 3.
Click Save to save your settings.
To restore these fields to the original default settings, click
Reset to Defaults. You must then Save
to actually have the defaults take effect.
To abandon your changes and revert to the current settings, click
Cancel.
Note: Save saves all changes made on any of the sub-tabs since the last Save. Cancel
discards all changes on all sub-tabs since the last save.
Advanced Network Configuration–the Advanced Setup Tab
Step 1. From the Network Setup tab, click the Advanced Setup tab.
The Advanced Setup page appears. Figure 6-9 shows the Advanced Setup tab for an Integrated
Access Manager, which includes all the tabs for both an Access Control Server and an Access
Controller.
Step 2. From the System Components List, select the system to configure.
Step 3. When you have finished making your changes, click Save.
To restore these fields to the original default settings, click
Reset to Defaults. You must then Save
to actually have the defaults take effect.
To abandon your changes and revert to the current settings, click
Cancel.
Note: Save saves all changes made on any of the sub-tabs since the last Save. Cancel
discards all changes on all sub-tabs since the last save.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 6-21