Filter
Top Products
Command Line Interface
set pptp on | off
Enables or disables PPTP.
set l2tp on | off
Enables or disables L2TP.
set ipsecsecret [ <secret> <secret>]
Sets the IPSec shared secret. Prompts for the secret if not entered on the command line.
clear ipsecsecret
Clears the IPSec shared secret.
set espencryption [des] [3des] [blowfish] [cast] [aes] [none]
Sets the IPSec ESP encryption methods. You must specify at least one method.
set espintegrity [md5] [sha1] [none]
Set the IPSec ESP integrity methods. You must specify at least one method.
set ikedh [group1] [group2] [group5]
Set the IPSec IKE Diffie-Hellman groups. You must specify at least one group.
set ikeencryption [des] [3des] [blowfish] [cast]
Set the IPSec IKE encryption methods. You must specify at least one method.
set ikeintegrity [md5] [sha1]
Set the IPSec IKE integrity methods. You must specify at least one method.
set ipsec on | off
Enables or disables IPSec.
set initialcontact on | off
Enables or disables IPSec initial contact messages to clients. Enabled by default.
set ssh on | off
Enables or disables ssh for Wireless Data Privacy.
A-22 HP ProCurve Secure Access 700wl Series Management and Configuration Guide