Filter
Top Products
Command Line Interface
remote reboot <ip-address>
Reboot the system at <ip-address>
remote rebootalt <ip>
Reboot the system at <ip-address> to alternate software version.
remote shutdown <ip-address>
Shutdown the system at <ip-address>
remote factoryreset <ip-address>
Factory reset the system at <ip-address>
remote upgrade <ip-address> <url> <key>
Upgrade the system at the specified IP address.
<url> The URL encoded location of the software release to install. The format of the URL is
<protocol>://<host>/<update file> or
<protocol>://<username>[:<password>]@<host>/<update file>
<protocol> can be ftp, http, or tftp.
<username>[:<password>] specifies a username and optional password with
access to the remote site, if required.
<update file> is the filename (including the path) of the software image.
For TFTP or anonymous FTP, the path is relative to the FTP or TFTP root. If a
username and password is required for FTP, then the full path to the update file must
be specified. For HTTP, the path is always relative to the web server‘s site root
directory.
The host must be an FTP, HTTP or TFTP server.
<key> The software release install key obtained from HP ProCurve.
A-20 HP ProCurve Secure Access 700wl Series Management and Configuration Guide