Filter
Top Products
Configuring the Network
Table 6-3. Edit Integrated Access Manager page field definitions
Field/Option Description
NAS-ID/Description A description for this unit. If using RADIUS accounting, this field is
used as the NAS-ID and is sent to the RADIUS server as part of the
accounting information. (If you do not enter a NAS-ID, the MAC
address of the Integrated Access Manager is sent instead.) See
—Using RADIUS for Accounting“ on page 5-20 for more details about
the RADIUS accounting feature.
Shared Secret The shared secret used to establish a trust relationship between the
Integrated Access Manager and any separate Access Controllers
(the shared secret does not affect the internal Access Controller).
Note: Once a connection has been established between the
Integrated Access Manager and an external Access Controller,
changing the shared secret on the Integrated Access Manager will
not disrupt the connection. However, once the connection is lost, the
Access Controller will not be able to re-establish the connection.
IP address) in order to communicate with the Access Control Server.
Confirm Shared Secret The shared secret, entered a second time to confirm.
Admin Username The username for the built-in administrator of this Integrated Access
Manager. The default is admin. The name can be up to 50
characters.
Admin Password The password for the built-in administrator of this Integrated Access
Manager. The default is admin. The password must be at least one
(non-blank) character in length (a minimum of 5 is recommended).
Confirm Admin Password The administrator password, entered a second time to confirm.
Enable HP ProCurve technical support (Optional.) A mark in this checkbox enables access by the Technical
access Support personnel at HP ProCurve to this Access Control Server.
Note: Enable this feature only if directed to do so by your HP
ProCurve Technical Support contact.
Enable SSH command line interface (Optional.) A mark in this checkbox enables remote access to the
Command Line Interface for this Integrated Access Manager via
SSH. This requires that the client system running the CLI supports
SSH.
If this checkbox is not checked, remote access to the CLI is disabled.
The CLI can be accessed only over a direct connection to the serial
port on the Integrated Access Manager.
» To modify the Integrated Access Manager settings, edit the desired fields and click Save.
To abandon your changes and revert to the current settings click
Cancel.
Configuring Access Controllers
An Access Controller that has been installed on the network and configured to communicate with the
Access Control Server (with the Access Control Server’s IP address and shared secret) appears
automatically in the System Components List.
6-10 HP ProCurve Secure Access 700wl Series Management and Configuration Guide