Filter
Top Products
Configuring Authentication
• To edit an Authentication Service, click the name of the service you want to edit, or click the
pencil icon at the end of the row. This takes you directly to the Edit Authentication Services
page for the filter you selected.
Note: You cannot edit the built-in Authentication Service or the NT Domain Logons service.
For these two services, no configuration is required.
• To delete a Authentication Service, click the trash can icon at the end of the row.
Note: You cannot delete the NT Domain Logon, 802.1x Logon, or Built-in Authentication
Services. You also cannot delete an Authentication Service that is in use–an error
message will inform you if this is the case.
• To create a new Authentication Service, click the
New Service... button at the bottom of the
Authentication Services list. This takes you to the New Authentication Services page.
• To reorder a selected service in the list, click the up/down arrows to the left of the
Authentication Service name.
Note: NT Domain Logon and 802.1x Logon cannot be reordered. These will always take
precedence over any other authentication services.
Step 4. Click Save to save this Authentication Policy. If you are editing an existing Access Policy, this
replaces the original Authentication Policy with the modified Authentication Policy definition.
To add the modified Authentication Policy as a new Authentication Policy, leaving the original
Authentication Policy unchanged, click
Save As Copy. The Save As Copy button is available only
on the Edit Authentication Policy page.
Click
Cancel to return to the previous page without making any further changes.
Configuring Authentication Services
An Authentication Service is a single instance of a service used for authentication, such as a specific
LDAP server or RADIUS server. The 700wl Series system supports the following services:
• NT Domain Logon
• 802.1x Logon
• LDAP directory services, such as Active Directory or iPlanet LDAP server
• RADIUS servers
• Kerberos services
• XML-RPC-based services
• The 700wl Series system’s built-in database. This is the default authentication service. You can populate
it with usernames and passwords through the Rights module, as one of the aspects of working with
Identity Profiles.
» To view the current Authentication Services, from the Authentication Policies page click the
Authentication Services link directly under the page name in the left-hand panel of the page.
The Authentication Services page appears (see Figure 5-3).
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 5-7