Filter
Top Products
2 Wait for the light located near the top memory card slot on the printer to come on. The light blinks to indicate
the memory card is being read or is transmitting data.
Warning—Potential Damage: Do not touch cables, any network adapter, the memory card, or the printer in
the area shown while actively printing, reading, or writing from the memory card. A loss of data can occur. Also,
do not remove the memory card while actively printing, reading, or writing from it.
M
S
XD
SD
/M
M
C
C
F/M
D
PictBridge
When the printer detects the memory card, the message Memory Card Detected appears on the control
panel display.
If the printer does not read the memory card, remove and reinsert it.
Notes:
• The printer recognizes one memory card at a time. If you insert more than one memory card, a message appears
on the display prompting you to remove all memory cards inserted.
• If a flash drive is inserted in the PictBridge port at the same time as a memory card is inserted in the card slot, a
message appears on the display prompting you to choose which memory device to use.
Inserting a flash drive
1 Insert the flash drive into the PictBridge port on the front of the printer.
MS
XD
SD/MMC
CF/MD
PictBridge
Note: An adapter may be necessary if your flash drive does not fit directly into the port.
2 Wait for the printer to recognize that a flash drive is installed. When the flash drive is recognized, the message
Storage Device Detected appears.
Working with photos
113