Filter
Top Products
3 Press Enter.
4 If the printer responds, you will see several lines appear that start with “Reply from”.
Turn off and restart the printer, and then try resending your print job.
5 If the printer does not respond, you will see “Request timed out.”
a Check that the computer has a wireless IP address.
1 Do one of the following:
• In Windows Vista, click All Programs Accessories Command Prompt.
• In Windows XP, click Start Programs or All Programs Accessories Command Prompt.
2 Type ipconfig.
3 Press Enter.
4 Check the Windows IP Configuration screen that appears for the wireless IP address of the computer.
Note: Your computer may have an IP address for a wired network, a wireless network, or both.
5 If your computer does not have an IP address, see the documentation that came with your wireless access
point (wireless router) to learn how to connect your computer to the wireless network.
b The printer may need to be reconfigured for new wireless network settings. For more information, see “Run
the Wireless Setup Utility”.
Run the Wireless Configuration Utility
1 Do one of the following:
• In Windows Vista, click .
• In Windows XP, click Start.
2 Click Programs or All Programs Lexmark 9500 Series.
3 Click Wireless Configuration Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part
of the setup process.
4 Follow the instructions on the computer screen to set up the printer on your wireless network.
Troubleshooting
202