Filter
Top Products
Notes:
• 2400 bps is the lowest transmission speed
• The lower the transmission speed, the longer it will take your fax to print.
• This solution will reduce the speed for future faxes until you reset the transmission speed.
Phone Line Busy
These are possible solutions. Try one or more of the following:
CHANGE REDIAL SETTINGS
The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial
up to five times at intervals up to 8 minutes.
To change the redial settings:
1 From the control panel, press or repeatedly until Fax is highlighted.
2 Press .
3 Press or repeatedly until Fax Setup is highlighted.
4 Press .
5 Press or repeatedly until Dialing and Sending is highlighted.
6 Press .
7 To change the length of time between redials:
a Press or repeatedly until you reach Redial Time.
b Press or repeatedly until the setting you want appears.
c Press to save.
8 To change the number of times the printer will redial:
a Press or repeatedly until you reach Redial Tries.
b Press or repeatedly until the setting you want appears.
c Press to save.
SCHEDULE TO RESEND FAX AT A LATER TIME
See “Sending a broadcast fax at a scheduled time” on page 155.
Troubleshooting
246