Filter
Top Products
Removing the printer from the Tray 2 base
If you need to move the printer to a different location, be sure you first remove the printer from the Tray 2 base. This
helps to avoid damaging the printer and the base.
To safely move the printer and the optional Tray 2, follow these precautions:
• Keep the printer in an upright position.
• Avoid severe jarring movements that may cause damage to the printer and the tray.
1 Turn the printer off, and disconnect the power cord from the wall outlet.
2 Disconnect all cables from the back of the printer.
3 Remove any paper from Tray 1 and the paper exit tray.
4 Grasp the printer on both sides using the handholds.
5 Lift the printer off of the Tray 2 base, and set the printer aside.
Cleaning the scanner glass
1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.
Cleaning the exterior of the printer
1 Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock, unplug the power cord from the wall outlet
and disconnect all cables to the printer before proceeding.
2 Remove paper from the paper tray or trays.
3 Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
Maintaining the printer
184