Filter
Top Products
Configuring a network printer manually
1 From the printer control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until Network Setup is highlighted.
4 Press .
5 Press or repeatedly until TCP/IP is highlighted.
6 Press .
The TCP/IP menu appears.
7 Find Enable DHCP, and then press to select Yes or No.
8 Find the IP Address, IP Netmask and IP Gateway menu items.
9 Press on each to enter the IP Address, IP Netmask, and IP Gateway for the printer.
10 Press to save your settings.
Resetting the internal print server to factory default
settings
1 From the printer control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until Network Setup is highlighted.
4 Press .
5 Press or repeatedly until Reset Network Adapter Defaults is highlighted.
6 Press .
The following message appears: This will reset all wireless network settings. Are you
sure?
7 Press to select Yes.
The message Clearing Network Settings appears.
Connecting the printer to a network
69