Filter
Top Products
DO YOU NEED TO ALIGN THE PRINT CARTRIDGES?
The cartridges may be out of alignment.
1 Do one of the following:
• In Windows Vista, click Control Panel.
• In Windows XP or 2000, click Start.
2 Click Programs or All Programs Lexmark 9500 Series.
3 Click Solution Center.
4 Click the Maintenance tab.
5 Click Align to fix blurry edges.
ARE THE PRINT CARTRIDGES CLEAN?
You may need to clean the print cartridge nozzles.
Printouts have alternating bands of light and dark print
If the printer pauses frequently during a print job and prints pages with alternating bands of light and dark print, it
is printing data faster than the computer can send it. Banded printing occurs when the printer pauses frequently.
You may need to change the printer software settings, or the problem may be that the printer and the computer are
not able to communicate properly.
ARE THE PRINTER AND THE COMPUTER ABLE TO COMMUNICATE DATA?
Check the printer status:
1 Do one of the following:
• In Windows Vista, click Control Panel.
• In Windows XP or 2000, click Start.
2 Click Programs or All Programs Lexmark 9500 Series.
3 Click Solution Center.
4 If the Printer Status is:
• Cannot Communicate, the problem could be hardware or printer software settings.
• Ready or Busy Printing, the problem may be with the printer software settings.
Transparencies or photos contain white lines
These are possible solutions. Try one or more of the following:
ADJUST THE SETTINGS ON THE PRINT SETUP TAB
1 With a document or photo open, click File Print.
2 Click Properties, Preferences, Options, or Setup.
The Print Setup tab appears.
Troubleshooting
212