Filter
Top Products
110
1. Enter VLAN Mode
2. Configure the IP address for VLAN interface and enables VLAN interface.
1. Enter VLAN Mode
2. Configure the IP address for VLAN interface and enables VLAN interface.
Command Explanation
VLAN Mode
ip address <ip-address> <mask> [secondary]
no ip address [<ip-address> <mask>]
Configure the VLAN interface
IP address; the “no ip
address [<ip-address>
<mask>]” command deletes
VLAN interface IP address.
VLAN Mode
shutdown
no shutdown
Enable/Disable VLAN interface
3.2.2.2 VLAN Interface Configuration Commands
3.2.2.2.1 interface vlan
Command: interface vlan <vlan-id>
no interface vlan <vlan-id>
Function: Enter VLAN Interface Mode; the “no interface vlan <vlan-id>” command
deletes existing VLAN interface. .
Parameter: <vlan-id> is the VLAN ID for the establish VLAN, valid range is 1 to 4094.
Command mode: Global Mode
Usage Guide: Before setting a VLAN interface, the existence of the VLAN must be
verified. Run the exit command will exit the VLAN Mode to Global Mode.
Example: Enter the VLAN Interface Mode for VLAN1.
Switch(Config)#interface vlan 1
Command Explanation
Global Mode
ip address {<ip-address> <mask>
[secondary] | bootp | dhcp}
no ip address [<ip-address> <mask>]
Enter VLAN Interface Mode; the “no
interface vlan <vlan-id>” command
deletes specified VLAN interface or
startup client protocol for bootp/dhcp