Filter
Top Products
470
16.4.4.1.5 show ip pim rp
Command: show ip pim rp [mapping | group-address]
Function: Display PIM RP related information
Parameter: mapping displays the group address and RP association.
group-address is the group address.
Default: No display by default.
Command mode: Admin Mode
Function: Display the RP information for PIM area 226.1.1.1.
Switch #show ip pim rp 226.1.1.1
RP Address for this group is: 192.2.1.1
Displayed information Explanation
RP Address RP address of the group.
16.4.4.1.6 debug ip pim
Command: debug ip pim
Function: Enable the debug function for displaying detailed PIM information; the “no”
format of this command disables this debug function.
Parameter: N/A.
Default: Disabled.
Command mode: Admin Mode
Usage Guide: If detailed information about PIM packets etc is required, this debug
command can be used.
Example:
Switch # debug ip pim
PIM debug is on
00: 17: 52: PIM: Received v2 Join/Prune on Vlan2 from 192.3.1.3 to 192.3.1.2
00: 17: 52: PIM: Receive Join-list: (192.1.1.1/32, 225.0.0.1/32), S-bit set
00: 17: 54: PIM: Received v2 Hello on Vlan4 from 192.4.1.4, holdtime 105
00: 17: 57: PIM: Received v2 Hello on vlan3 from 192.2.1.1, holdtime 105
00: 17: 57: PIM: Received v2 Hello on Vlan2 from 192.3.1.3, holdtime 105
00: 17: 58: PIM: Received v2 Hello on Vlan4 from 192.4.1.3, holdtime 105
00: 18: 21: PIM: Send v2 Hello on vlan2, holdtime 105
00: 18: 21: PIM: Send v2 Hello on vlan4, holdtime 105
00: 18: 21: PIM: Send v2 Hello on vlan3, holdtime 105
00: 18: 21: PIM: Send v2 Hello on Vlan4, holdtime 105
00: 18: 21: PIM: Send v2 Hello on Vlan2, holdtime 105