Filter
Top Products
90
2.6 WEB Management
Click Switch Basic Configuration. Users can deploy the switch basic configuration such as
enter or quit privileged mode, enter or quit interface mode, show switch clock and show
switch system version etc.
2.6.1 Switch Basic Configuration
Click Switch Basic Configuration, Switch Basic Configuration. Users can configure
switch clock, CLI prompt message and timeout value for exiting Admin Mode etc.
2.6.1.1 BasicConfig
Click Switch Basic Configuration, Switch Basic Configuration, BasicConfig. Users can
configure switch clock, CLI prompt message and mapping between hosts and IP
addresses.
& Basic clock configuration - Configure system date and clock. See the equivalent
CLI command at 2.1.1
Set HH: MM: SS to 23: 0: 0, set YY.MM.DD to 2002.8.1, and then click Apply. The
switch time is set.
& Hostname configuration - Configure switch CLI prompt message. See the
equivalent CLI command at 2.1.9
Set Hostname to Test, and then click Apply. The configuration is applied on the
switch.
2.6.1.2 Configure exec timeout
Click Switch Basic Configuration, Switch Basic Configuration, Configure exec timeout.
Configure timeout value for exiting Admin Mode. See the equivalent CLI command at
2.1.5
Set Timeout to 6, and then click Apply. The switch timeout value for exiting Admin
Mode is set to 6 minutes.