Filter
Top Products
77
allowed to save in ROM only. ES4626/ES4650 mandates the name of the boot file to be
boot.rom.
Configuration file: including start up configuration file and active configuration file. The
distinction between start up configuration file and active configuration file can facilitate the
backup and update of the configurations.
Start up configuration file: refers to the configuration sequence used in switch start up.
ES4626/ES4650 start up configuration file stores in FLASH only, corresponding to the so
called configuration save. To prevent illicit file upload and easier configuration,
ES4626/ES4650 mandates the name of start up configuration file to be startup-config.
Active configuration file: refers to the active configuration sequence use in the switch. In
ES4626/ES4650, the active configuration file stores in the RAM. In the current version, the
active configuration sequence running-config can be saved from the RAM to FLASH by
write command or copy running-config startup-config command, so that the active
configuration sequence becomes the start up configuration file, which is called
configuration save. To prevent illicit file upload and easier configuration, ES4626/ES4650
mandates the name of active configuration file to be running-config.
Factory configuration file: The configuration file shipped with ES4626/ES4650 in the
name of factory-config. Run set default and write, and restart the switch, factory
configuration file will be loaded to overwrite current start up configuration file.
2.5.2.2 FTP/TFTP Configuration
The configurations of ES4626/ES4650 as FTP and TFTP clients are almost the same,
so the configuration procedures for FTP and TFTP are described together in this manual.
2.5.2.2.1 FTP/TFTP Configuration Task Sequence
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（1） For FTP client, server file list can be checked.
2. FTP server configuration
（1） Start FTP server
（2） Configure FTP login username and password
（3） Modify FTP server connection idle time
（4） Shut down FTP server
3. TFTP server configuration
（1） Start TFTP server
（2） Configure TFTP server connection idle time